Posted by RAMA MELOW | 7:28 AM | | 2 comments »

HOW to make car look great?,,Your vehicle represents a huge investment of both money and the time you spend driving your car, truck, or SUV. Whether you want to resell one later at a good price or keep your current car and keep it looking GREAT- and spiffy - for years to come, it's smart for you to maintain your car exterior from the very day you buy it.

The first place to go to learn how to do this is your vehicle owner manual. This manual specifies the best means to clean, wax, and otherwise shine your car, truck, or SUV.

Understand there is not always a one solution fits all scenario. The car detergent or wax you use on your Toyota pickup may not be right for your Mitsubishi Mirage.

Different manufacturers may use different types of enamel and sealants that may require slightly different solvents to clean the pain or work best with very specific types of car wax. It also may be necessary to do something after a year or two to protect the seal on the paint itself so your car paint does not fade or chip as quickly.

Should you use wax or sealers? It depends again on what your manual recommends. Both car wax and car sealer act to filter out the harmful effects of sun rays including ultraviolet, ozone, and moisture. In the past, wax and sealers used to be quite different on an ingredient level because sealers contained silicone while waxes did not. This often meant a sealer would last longer than a car wax.

Yet that line has blurred because many car wax products now contain silicone and sometimes other properties that were once the exclusive domain of car sealers. Check your manual and your product packages carefully.

Some experts suggest that you can actually deep clean and wax too often. For example, deep scrubbing can wear down the sealant used to protect the paint. Sometimes, you can even damage the car enamel as well.

21 Tips to Keep Your Car in Top-Notch Condition
1. Be patient during the break-in period
You've bought your dream car and now you want to make it last at long as possible in top condition. Here are some things to remember as you pull it out of the dealer's lot:

# During the break-in period, typically the first 1,000 miles (1,600 km), keep your speed under 55 mph (88 kpm) or to the speed recommended by your car's manufacturer.

# Avoid heavy loads on the drive train, such as towing trailers, and loading the roof rack or trunk with heavy construction materials.

# Do not allow your new car to idle for long periods -- this is good advice for the life of your car, but especially during breakin. The oil pressure generated by doing so may not be sending oil to every part of your engine.

# Use only light to medium acceleration, keeping the engine rpms below 3,000 for the first few hours of driving.

2. Drive with care everyday
# Being car considerate shouldn't stop after the break-in. Drive with care every day and your car will reward you with longer intervals without repair. Do not race your car's engine during start-up.This is a quick way to add years of wear to your engine, especially if it's cold outside.

# Accelerate slowly when you begin your drive.The most wear to the engine and drive train occurs in the first ten to twenty minutes of operation.

# Warming the engine by letting it idle in the driveway is not a smart idea.The engine doesn't operate at its peak temperature, resulting in incomplete fuel combustion, soot deposits on cylinder walls, oil contamination, and ultimately damaged components.

# Put less strain on your engine and automatic transmission by shifting to neutral at red lights. Otherwise, the engine is still working to push the car even while it's stopped.

# Avoid driving at high speeds and accelerating quickly, especially when it's very hot or very cold outside. Such driving behavior will result in more frequent repairs.

# Extend the life of your tires with careful driving. Observe posted speed limits. Avoid fast starts, stops, and turns. Avoid potholes and objects on the road. Don't run over curbs or hit the tire against the curb when parking. And, of course, don't burn rubber.

# When turning your steering wheel, don't hold it in an extreme right or left position for more than a few seconds. Doing so can damage the power-steering pump.

# Consolidate your short driving trips. Most of the wear and tear -- as well as the pollution your car generates -- takes place in the first few minutes of driving. Doing several errands at once, during low traffic hours if possible, will keep your engine happier longer.

3. Buy gas at reputable service stations
Ask whether the gas you buy is filtered at the pump and if the station has a policy about changing the pump filters regularly. If you get a song and dance, find another gas station. Some stations don't have pump filters, making you more vulnerable to dirty gasoline. Other stations may not mix alcohol and fuel properly -- or worse, water down their product. Find a station you trust and stick to it.

4. Don't fill up if you see the tanker
If you happen to see a gasoline tanker filling the tanks at your local gas station, come back another day or go to a different station. As the station's underground tanks are being filled, the turbulence can stir up sediment. Sediment in your gas can clog fuel filters and fuel injectors, causing poor performance and possibly necessitating repairs.

5. Go easy when you're stuck
When stuck in mud or snow, don't make the problem worse by damaging an expensive component. Gently rocking in an attempt to free the car is fine. But if it looks as though you're really stuck, don't keep at it. Throwing your car from forward to reverse repeatedly, as well as spinning tires at high speeds, can generate lots of heat and spell trouble for transmissions, clutches, and differentials. It may be cheaper in the long run to call the tow truck rather than risk big repair bills down the road. It's a good idea to carry a traction aid in the trunk, such as sand, gravel, or cat litter.

6. Lighten up your key chain
Does your car key share a chain with a dozen or more other keys? That's a pretty heavy load hanging off the car key when it's in the ignition.The weight, combined with bouncing while you drive, can wear out the tumblers inside the ignition and eventually lead to ignition switch failure.To add years of service to your ignition switch, purchase a lightweight key chain that allows you to separate your ignition key from the others. Drive with only the ignition key in your ignition. If your ignition key "sticks" when you try to turn on the car, it's a warning that your ignition switch is about to fail. Replace it before you get stranded.

7. Choose a good car insurer
Sometimes, no matter how careful you are, disaster inevitably strikes -- typically in the form of an accident. Make sure that your car will be repaired to the best possible standard by finding an insurer that will pay for parts from the original manufacturer and guarantee the repairs it authorizes.

8. Keep an auto log
Keep a pad and pencil in the glove compartment and use them to record your gas fill-ups and mileage. If you notice that your gas mileage worsens, mention it to your service man. It may be an early warning sign that something is wrong with your car.

9. Preserve your car during long-term storage
If you are not going to use your car for more than a month, store it properly to prevent unnecessary damage and repairs upon your return.

.Fill the gas tank to help prevent condensation from accumulating in the gas tank. Add a fuel stabilizer and drive the car around a bit to distribute the additive to engine parts.

.Wash and wax the car thoroughly to protect the finish.

. Place a vapor barrier on your garage floor. A 4-mil polyethylene drop cloth will do.

. Disengage the parking brake to help avoid brake corrosion.

. Put the car on jack stands to take the weight of the vehicle off the wheels and tires.

. Disconnect and remove the battery to keep it from draining. Place the battery on a trickletype charger. Or periodically drain the battery, using a small light bulb, and then recharge it with a low-volt charger.

.Plug the tailpipe with a rag to prevent moist air from infiltrating into it.
10. Park in the shade
Of course, a garage is always the ideal place to park your car. But if one isn't available, minimize interior damage from UV sunlight and heat by always trying to park your car in the shade. If no shade is available or if you find parking under a tree results in bird droppings, use a car shade to minimize the sun's impact. As a bonus, you'll have a cooler car to step into on hot sunny days. Car shades come in two basic types: those that you unfold and place on the front windshield and rear window, or pleated types that attach to the windshield posts (with adhesive), window frames (with Velcro), or the windows themselves (with suction cups).

11. Clean the inside, too
Vacuum and sponge your interior every time you wash your car. Dirt particles are abrasive, and spilled liquids, such as soda, can be corrosive.Vacuum your interior thoroughly with a powerful vacuum (small cordless models are generally too weak). Use the appropriate wand heads when vacuuming. The bare metal wand can mar and scratch surfaces. Sponge vinyl surfaces clean with a solution of mild detergent and water.

12. Clean dash gauges carefully
Use a soft damp cloth to lightly wipe dust from the clear plastic lenses on your dashboard. Too much pressure will scratch them. Too many scratches can make it difficult to read your gauges under certain lighting conditions.

13. Let floor mats take winter's beating
Use floor mats to protect carpeting. The best type for controlling salt, slush, and mud in winter are rubber wafflestyle mats. They stay in place, don't allow the water to seep through, and are easy to wash clean. Carpet-style mats are helpful, too. Shake, vacuum, or wash as needed; replace them as they wear through.

14. Blast mats with the hose
When washing your car, drag out the rubber or carpet floor mats and blast them with the hose.This will dislodge dirt particles that, if allowed to build up, will grind holes in your mats. Let the mats dry thoroughly in the sun before reinstalling them.

15. For stubborn carpet or mat stains
After vacuuming floor mats or interior carpeting, apply foam rug cleaner to resistant stains as directed by the maker. Work the foam into a few square feet at a time, using a wet sponge or brush. Vacuum when dry.

16. Preserve door and window seals
Wipe a rubber protectant (such as Armor-All) or silicone on door and window weatherstripping to keep it in good condition. Don't use an oilbased product, such as WD-40, because the oil will damage the rubber. Regular cleaning and treatment of your car's weatherstripping will also lessen the likelihood of your door sticking to its rubber seal in cold weather, a common cause of damage to the rubber.

17. Fix bad weatherstripping immediately
If your weatherstripping is letting rainwater leak into the interior of your car, take a look at it and decide if you can repair it or if it needs to be replaced. Small leaks can be handled with brush-on seam sealers. Resecure loose sections, not otherwise damaged, with trim adhesive. Torn sections may be repaired with special caulking available at auto parts stores. You may also be able to extend the life of worn-but-intact sections by inserting foam rods, available at automotive stores, into the hollow section of the weatherstripping. If you decide to replace entire sections of gasket, don't simply buy generic stuff such as you'd use around the house. Buy a product that matches your car's original weatherstripping -- it's available in a wide variety of profiles from dealerships and automotive mail-order catalogues.

18. Keep leather from drying out and cracking
Leather cars seats are durable and don't require a lot of maintenance. After a few years, however, the seats can become soiled. Use a leather cleaner to remove dirt and stains.Then apply a leather protectant formulated for pigmented or top-coated grain leather (the leather used for most leather car upholstery). Protectants will resist stains and make the upholstery easier to clean in the future. Choose a protectant that includes conditioners to keep your leather supple.

19. Use upholstery cleaners on soiled seats
The same upholstery cleaners you use at home can be used on your car's upholstery. Use them sparingly, however, to avoid saturating the fabric. Use a clean cloth to wipe away the foam. On velour seats, brush the fibers gently to avoid matting them and to preserve the original texture of the fabric.

20. Renew fabric upholstery
Spraying fabric car seats and carpets with a fabric protectant, such as Scotchgard, will make them resist dirt and stains, and make them easier to clean. Thoroughly clean the fabrics before using one of these products and then test the product on an inconspicuous place to be sure the treatment will not discolor the fabric.


  1. CATATAN MAT GBONG // December 14, 2008 at 8:00 AM  


  2. CLICK BANK // December 14, 2008 at 8:06 AM  

    get dollar on click bank now

Post a Comment

pliss dont spam